Letters Unlimited vinyl lettering
1010 Morse Ave. Unit E
Schaumburg, IL 60193
sales@lettersunlimited.com
vinyl lettering
Vinyl Letters and Vinyl Lettering
800-422-4231

Alternative lettering installation instructions

Center Hinge Method
Alternative lettering installation instructions: Step 1
Figure 1   
Alternative lettering installation instructions: Step 2
Figure 2   
Alternative lettering installation instructions: Step 3
Figure 3   
Alternative lettering installation instructions: Step 4
Figure 4   
 
  1. Position legend with tacks (small pieces of masking tape). See figure 1
  2. Apply masking tape vertically through center of legend. See figure 2
  3. Remove tack from one end, lay legend over towards center tape hinge.
  4. Pull release liner away from application tape and legend until close to hinge.
  5. Cut release liner with scissors and discard.
  6. Squeegee down exposed half of legend, holding the end up and allowing the squeegee to cause contact.
  7. Remove the tack hinge and lay the other half over.
  8. Remove the rest of the release liner and squeegee into place.
  9. Remove application tape.
Horizontal Hinge Method
  1. Position legend with tacks (small pieces of masking tape). See figure 1
  2. Apply masking tape horizontally across top of legend. See figure 3
  3. Remove both tacks.
  4. Cut legend into smaller areas (vertically between letters). See figure 4
  5. Starting at right (if right handed), flip one section over and release liner.
  6. Wipe sign surface free of dust (which may have come from back of legend).
  7. Squeegee into place using one smooth downward stroke. Repeat for balance of legend.
  8. Re-squeegee using more pressure.
  9. Remove application tape.





Letters Unlimited logo   Copyright © 2003-2017 Letters Unlimited, Inc., All Rights Reserved   Mr. Letter Dude